We can supply you with the required access panels for ducting that may require the installation of an inspection port or additional cleaning port for better accessibility. Our local supplier is well respected in the industry for the provision of access panels that meet all the relevant standards. Our technicians are trained and available to install these access panels if required.
This product has been simply designed for ease of operation. Simply turn the galvanised steel sash cans provided on the panel to un-lock then remove from its frame.
Frame: Made from press formed galvanised stell 0.8mm – 1.0mm
Panel: 2-piece press formed 0.6mm – 0.8mm galvanised steel
Seal: 1 piece heat welded PVC compression gasket form to ensure an airtight seal.
Locks: 2 or 4 galvanised steel sash fasteners. Combining a specially designed hook and cam system to give an airtight seal between the panel and the frame. Optional brass or stainless steel available as a special order.
Insulation: Thermal and acoustic 25mm fibreglass insulation is sealed air tight within the sandwich panel via the PVC seal.
Retaining Insert Ring: This optional retaining ring tabs into the frame. Designed specifically to cover loose internal edges or internal raw edges of fibreboard ducting around the panel (Available for AP1, AP2, AP3’s only).
| Model Number | Nominal Size | A x B | C x D | E x F | Carton Quantity | Carton Weights |
| AP0 | 650 x 500 | 688 x 538 | 638 x 492 | 600 x 456 | 3 | 19 Kg |
| AP1 | 500 x 375 | 538 x 413 | 492 x 363 | 456 x 322 | 5 | 18.3 Kg |
| AP2 | 375 x 250 | 413 x 281 | 369 x 238 | 325 x 194 | 10 | 18.5 Kg |
| AP3 | 250 x 150 | 284 x 194 | 238 x 147 | 203 x 114 | 10 | 9.5 Kg |
